Hot-rolled products

Pig iron Slabs Hot-rolled products

Ñold-rolled products Hot-dipped tinplate Black plate

Cold-rolled steel strip Roll-formed sections

To order the desired products on-line, you need to login.

Steel grade	Dimensions within the limits, mm	Remarks
Hot- rolled plates   GOST 14637-89
St2kp (DSTU 2651:2005 / GOST 380-2005) St2ps (DSTU 2651:2005 / GOST 380-2005) St3kp (DSTU 2651:2005 / GOST 380-2005) St3ps (DSTU 2651:2005 / GOST 380-2005) St4kp (DSTU 2651:2005 / GOST 380-2005) St4ps (DSTU 2651:2005 / GOST 380-2005)	4.0–6.0 × 1000–1500 × 2000–6000 Sheet	Mill edge. Rolled products of steel grades St 2-3 kp, ps are delivered as per categories 1,2,4,5; delivery as per category 2à TU U 14-16-56-2000 is possible; St 4kp — all properties are optional; St4 ps — as per category 3 GOST 14637-89 (requirements as per impact viscosity are optional).
Hot- rolled plates   GOST 14637-89
St2kp (DSTU 2651:2005 / GOST 380-2005) St2ps (DSTU 2651:2005 / GOST 380-2005) St3kp (DSTU 2651:2005 / GOST 380-2005) St3ps (DSTU 2651:2005 / GOST 380-2005) St4kp (DSTU 2651:2005 / GOST 380-2005) St4ps (DSTU 2651:2005 / GOST 380-2005)	6.1–8.0 × 1000–1500 × 2000–4000 Sheet	Mill edge. Mechanical properties are optional
Hot- rolled plates   GOST 14637-89
St2sp (DSTU 2651:2005 / GOST 380-2005) St3sp (DSTU 2651:2005 / GOST 380-2005) St4sp (DSTU 2651:2005 / GOST 380-2005)	4.0–6.0 × 1000–1400 × 2000–6000 Sheet	Mill edge. Rolled products of steel grades St 2-3 sp are delivered as per categories 1,2,4,5; delivery as per category 2a TU U 14-16-56-2000 is possible; St 4sp — all properties are optional; St4 sp — as per category 3 GOST 14637-89 (requirements as per impact viscosity are optional).
Hot- rolled plates   GOST 14637-89
St2sp (DSTU 2651:2005 / GOST 380-2005) St3sp (DSTU 2651:2005 / GOST 380-2005) St4sp (DSTU 2651:2005 / GOST 380-2005)	6.1–8.0 × 1000–1400 × 2000–4000 Sheet	Mill edge. Mechanical properties are optional
Hot- rolled plates   TU U 14-16-56-2000
St1kp (DSTU 2651:2005 / GOST 380-2005) St1ps (DSTU 2651:2005 / GOST 380-2005)	4.0–6.0 × 1000–1500 × 2000–6000 6.1–8.0 × 1000–1500 × 2000–4000 Sheet	Mill edge. Delivery as per category 2a TU U 14-16-56-2000
Hot- rolled plates   TU U 14-16-56-2000
St1sp (DSTU 2651:2005 / GOST 380-2005)	4.0–6.0 × 1000–1400 × 2000–6000 6.1–8.0 × 1000–1400 × 2000–4000 Sheet	Mill edge. Delivery as per category 2a TU U 14-16-56-2000
Hot- rolled plates   TU U 14-4-426-98
St1kp (DSTU 2651:2005 / GOST 380-2005) St1ps (DSTU 2651:2005 / GOST 380-2005) St2kp (DSTU 2651:2005 / GOST 380-2005) St2ps (DSTU 2651:2005 / GOST 380-2005) St3kp (DSTU 2651:2005 / GOST 380-2005) St3ps (DSTU 2651:2005 / GOST 380-2005) St4kp (DSTU 2651:2005 / GOST 380-2005) St4ps (DSTU 2651:2005 / GOST 380-2005)	4.0–8.0 × 1000–1500 Coil	Mill edge. Categories 1,2,3 TU U 14-4-426-98 are preferred. Coil weight up to 8 tons or up to 16 tons. For rolled products 6,1-8,0 mm thick of categories 4 & 5 mechanical properties are optional.
Hot- rolled plates   TU U 14-4-426-98
St1sp (DSTU 2651:2005 / GOST 380-2005) St2sp (DSTU 2651:2005 / GOST 380-2005) St3sp (DSTU 2651:2005 / GOST 380-2005)	4.0–8.0 × 1000–1400 Coil	Mill edge. Weight of coils up to 8 tons or up to 16 tons. Categories 1,2,3 TU U 14-4-426-98 are preferred. For rolled products 6,1-8,0 mm thick of categories 4 & 5 mechanical properties are optional.
Hot- rolled plates   TU U 14-4-426-98
St4sp (DSTU 2651:2005 / GOST 380-2005)	4.0–8.0 × 1000–1400 Coil weight up to 8 tons	Mill edge. Weight of coils up to 8 tons. Categories 1,2,3 TU U 14-4-426-98 are preferred. For rolled products 6,1-8,0 mm thick of categories 4 & 5 mechanical properties are optional.
Hot- rolled plates   TU U 14-4-426-98
St4sp (DSTU 2651:2005 / GOST 380-2005)	4.0–4.9 × 1000–1250 5.0–8.0 × 1000–1400 Coil weight up to 16 tons	Mill edge. Weight of coils up to 16 tons. Categories 1,2,3 TU U 14-4-426-98 are preferred. For rolled products 6,1-8,0 mm thick of categories 4 & 5 mechanical properties are optional.
Hot- rolled plates   TU U 14-4-426-98
St5sp (DSTU 2651:2005 / GOST 380-2005)	4.0–6.0 × 1000–1250 Coil	Mill edge. Coil weight up to 8 t. Mechanical properties are optional.
Hot- rolled plates   TU U 27.1-23365425-621:2007
S235JR (DSTU EN 10025:2005 / EN 10025:1990) S235JRG1 (DSTU EN 10025:2005 / EN 10025:1990) S235JRG2 (DSTU EN 10025:2005 / EN 10025:1990)	4.0–6.0 × 1000–1500 × 2000–6000 6.1–8.0 × 1000–1500 × 2000–4000 Sheet	Mill edge. Test for impact bending — as per agreement with the Works.
Hot-rolled plates   TU U 27.1-23365425-621:2007
S235JR (DSTU EN 10025:2005 / EN 10025:1990) S235JRG1 (DSTU EN 10025:2005 / EN 10025:1990) S235JRG2 (DSTU EN 10025:2005 / EN 10025:1990)	4.0–8.0 × 1000–1500 Coil	Mill edge. Test for impact bending — as per agreement with the Works. Delivery in coils of weight up to 8 tons or up to 16 tons.
Hot- rolled plates   TU U 27.1-23365425-621:2007
S275JR (DSTU EN 10025:2005 / EN 10025:1990)	4.0–6.0 × 1000–1400 × 2000–6000 6.1–8.0 × 1000–1400 × 2000–4000 Sheet	Mill edge. Test for impact bending — as per agreement with the Works.
Hot- rolled plates   TU U 27.1-23365425-621:2007
S275JR (DSTU EN 10025:2005 / EN 10025:1990)	4.0–8.0 × 1000–1400 Coil	Mill edge. Test for impact bending — as per agreement with the Works. Delivery in coils of weight up to 8 tons or up to 16 tons.
Corrugated lentil form hot-rolled products   TU U 27.1-31632138-1333:2005
St1kp (DSTU 2651:2005 / GOST 380-2005) St1ps (DSTU 2651:2005 / GOST 380-2005) St2kp (DSTU 2651:2005 / GOST 380-2005) St2ps (DSTU 2651:2005 / GOST 380-2005) St3kp (DSTU 2651:2005 / GOST 380-2005) St3ps (DSTU 2651:2005 / GOST 380-2005) 08kp (GOST 1050-88) 08ps (GOST 1050-88) 10kp (GOST 1050-88) 10ps (GOST 1050-88) 15kp (GOST 1050-88) 15ps (GOST 1050-88) 20kp (GOST 1050-88) 20ps (GOST 1050-88) S235JR (DSTU EN 10025:2005 / EN 10025:1990) S235JRG2 (DSTU EN 10025:2005 / EN 10025:1990)	4.0–6.0 × 1000–1250 × 3500–5000 Sheet	Mill edge. As per agreement with the Works delivery of size 3,0-3,9õ1000 mm is possible. Mechanical properties are not specified. Delivery in coils of weight up to 8 tons is possible.
Hot-rolled sheets 2,0-3,9 mm unpickled DSTU 2834-94   GOST 16523-97
St1kp (DSTU 2651:2005 / GOST 380-2005) St1ps (DSTU 2651:2005 / GOST 380-2005) St2kp (DSTU 2651:2005 / GOST 380-2005) St2ps (DSTU 2651:2005 / GOST 380-2005) St3kp (DSTU 2651:2005 / GOST 380-2005) St3ps (DSTU 2651:2005 / GOST 380-2005)	2.0–2.5 × 1000–1250 × 2000–4000 2.6–2.9 × 1000–1360 × 2000–4000 3.0–3.9 × 1000–1500 × 2000–6000 Sheet	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons is possible. Delivery in coils of weight up to 16 tons of the following product mix is possible: St1kp (ps): 2,0-2,6õ1000-1250 mm; 2,7-2,9õ1000-1280 mm; 3,0-3,3õ1000-1330 mm; 3,4-3,9õ1000-1360 mm. St2kp (ps): 2,0-2,4õ1000-1100 mm; 2,5-2,6õ1000-1250 mm; 2,7-2,9õ1000-1280 mm; 3,0-3,9õ1000-1300 mm. St3kp (ps): 2,5-2,6õ1000-1250mm; 2,7-3,9õ1000-1280mm.
Hot-rolled sheets 2,0-3,9 mm unpickled DSTU 2834-94   GOST 16523-97
St1sp (DSTU 2651:2005 / GOST 380-2005) St2sp (DSTU 2651:2005 / GOST 380-2005) St3sp (DSTU 2651:2005 / GOST 380-2005)	2.0–2.4 × 1000 × 2000–4000 2.5–3.5 × 1000–1250 × 2000–4000 3.6–3.9 × 1000–1400 × 2000–6000 Sheet	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons is possible. Delivery in coils of weight up to 16 tons of the following product mix is possible: St1sp-St2sp: 2,5õ1000-1100 mm; 2,6-3,9õ1000-1250 mm. St3sp: 3,0-3,4õ1000 mm; 3,5-3,9x1000-1250 mm. Rolled products of steel grade St3sp are delivered according to category 4 DSTU 2834-94 (GOST 16523-97)
Hot-rolled sheets 2,0-3,9 mm unpickled DSTU 2834-94   GOST 16523-97
St4kp (DSTU 2651:2005 / GOST 380-2005) St4ps (DSTU 2651:2005 / GOST 380-2005) St4sp (DSTU 2651:2005 / GOST 380-2005)	3.0–3.4 × 1000 × 2000–6000 3.5–3.9 × 1000–1250 × 2000–6000 Sheet	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons & coils of weight up to 16 tons.
Hot-rolled sheets 2,0-3,9 mm unpickled   TU U 14-4-426-98
St1kp (DSTU 2651:2005 / GOST 380-2005) St1ps (DSTU 2651:2005 / GOST 380-2005) St2kp (DSTU 2651:2005 / GOST 380-2005) St2ps (DSTU 2651:2005 / GOST 380-2005) St3kp (DSTU 2651:2005 / GOST 380-2005) St3ps (DSTU 2651:2005 / GOST 380-2005)	2.0–2.5 × 1000–1250 2.6–2.9 × 1000–1360 3.0–3.9 × 1000–1500 Coil	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons. Delivery in coils of weight up to 16 t of the following product mix is possible: St 1 kp (ps): 2,0-2,6õ1000-1250mm; 2,7-2,9õ1000-1280mm; 3,0-3,3õ1000-1330mm; 3,4-3,9õ1000-1360mm. St 2 kp (ps): 2,0-2,4õ1000-1100mm; 2,5-2,6õ1000-1250mm; 2,7-2,9õ1000-1280mm; 3,0-3,9õ1000-1300mm. St3 kp (ps): 2,5-2,6õ1000-1250mm; 2,7-3,9õ1000-1280mm.
Hot-rolled sheets 2,0-3,9 mm unpickled   TU U 14-4-426-98
St1sp (DSTU 2651:2005 / GOST 380-2005) St2sp (DSTU 2651:2005 / GOST 380-2005) St3sp (DSTU 2651:2005 / GOST 380-2005)	2.0–2.4 × 1000 2.5–3.5 × 1000–1250 3.6–3.9 × 1000–1400 Coil	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons. Delivery in coils of weight up to 16 tons of the following product mix is possible: St1sp, St2sp — 2,5õ1000-1100; 2,6-3,9õ1000-1250 mm. St3sp — 3,0-3,4õ1000 mm; 3,5-3,9õ1000-1250 mm. Rolled products of steel grade St2sp and St3sp are delivered as per category 1 TU U 14-4-426-98.
Hot-rolled sheets 2,0-3,9 mm unpickled   TU U 14-4-426-98
St4kp (DSTU 2651:2005 / GOST 380-2005) St4ps (DSTU 2651:2005 / GOST 380-2005) St4sp (DSTU 2651:2005 / GOST 380-2005)	3.0–3.4 × 1000 3.5–3.9 × 1000–1250 Coil	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons. Delivery in coils of weight up to 16 tons of the following product mix: St4sp — 3,0-3,4x1000 mm - 3,5-3,9x1000-1250 mm Rolled products of steel grade St4sp is delivered as per category 1 TU U 14-4-426-98.
Hot-rolled sheets 2,0-3,9 mm unpickled   TU U 14-4-426-98
St5sp (DSTU 2651:2005 / GOST 380-2005)	3.0–3.4 × 1000 3.5–3.9 × 1000–1250 Coil	Mill edge. Delivery in coils of weight up to 8 t. Mechanical properties are optional.
Hot-rolled sheets 2,0-3,9 mm unpickled   TU U 27.1-23365425-621:2007
S235JR (DSTU EN 10025:2005 / EN 10025:1990) S235JRG1 (DSTU EN 10025:2005 / EN 10025:1990) S235JRG2 (DSTU EN 10025:2005 / EN 10025:1990)	2.0–2.5 × 1000–1250 × 2000–4000 2.6–2.9 × 1000–1360 × 2000–4000 3.0–3.9 × 1000–1500 × 2000–6000 Sheet	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons is possible. Delivery in coils of weight up to 16 tons of the following product mix is possible: 2,5õ1000-1100; 2,6-3,9õ1000-1250 mm.
Hot-rolled sheets 2,0-3,9 mm unpickled   TU U 27.1-23365425-621:2007
S275JR (DSTU EN 10025:2005 / EN 10025:1990)	2.0–2.4 × 1000 × 2000–4000 2.5–3.5 × 1000–1250 × 2000–4000 3.6–3.9 × 1000–1400 × 2000–6000 Sheet	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons is possible. Delivery in coils of weight up to 16 tons of the following product mix is possible: 3,0-3,4õ1000 mm ; 3,5-3,9õ1000-1250 mm.
Hot-rolled unpickled sheets,(thickness 1,9 mm) DSTU 2834-94   GOST 16523-97
St1kp (DSTU 2651:2005 / GOST 380-2005) St1ps (DSTU 2651:2005 / GOST 380-2005) St2kp (DSTU 2651:2005 / GOST 380-2005) St2ps (DSTU 2651:2005 / GOST 380-2005) St3kp (DSTU 2651:2005 / GOST 380-2005) St3ps (DSTU 2651:2005 / GOST 380-2005) 08kp (GOST 1050-88) 08ps (GOST 1050-88) 10kp (GOST 1050-88) 10ps (GOST 1050-88) 15kp (GOST 1050-88) 15ps (GOST 1050-88) 20kp (GOST 1050-88) 20ps (GOST 1050-88) S235JR (DSTU EN 10025:2005 / EN 10025:1990)	1.9 × 1000–1100 Coil	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons.
Hot-rolled slit coils   TU U 27.1-23365425-637:2008
St1kp (DSTU 2651:2005 / GOST 380-2005) St1ps (DSTU 2651:2005 / GOST 380-2005) St1sp (DSTU 2651:2005 / GOST 380-2005) St2kp (DSTU 2651:2005 / GOST 380-2005) St2ps (DSTU 2651:2005 / GOST 380-2005) St2sp (DSTU 2651:2005 / GOST 380-2005) St3kp (DSTU 2651:2005 / GOST 380-2005) St3ps (DSTU 2651:2005 / GOST 380-2005) St3sp (DSTU 2651:2005 / GOST 380-2005) 08kp (GOST 1050-88) 08ps (GOST 1050-88) 10kp (GOST 1050-88) 10ps (GOST 1050-88) 10 (GOST 1050-88) 15kp (GOST 1050-88) 15ps (GOST 1050-88) 15 (GOST 1050-88) 20kp (GOST 1050-88) 20ps (GOST 1050-88) 20 (GOST 1050-88)	2.0–2.5 × 150–610 2.6–3.0 × 150–660 3.1–8.0 × 150–735	III-IV surface finish group. Shearing spacing is 1mm. Internal coil diameter is 750mm plus-and-minus limit 50 mm. Rolled products 4,0-6,0mm thick of steel grades St 2kp (ps,sp) and 3kp (ps, sp) are delivered as per categories 1,2,4,5 GOST 14637-89, delivery as per category 2à TU U 14-16-56-2000 is possible. For rolled products 6,1-8,0 mm thick mechanical properties are optional. Rolled products of steel grades St 1 kp (ps,sp) are delivered as per category 2à TU U 14-16-56-2000. For rolled sheets of steel grade St3sp and 20 delivery of category 4 DSTU 2834-94 (GOST 16523-97) is preferred.
Hot-rolled slit coils   TU U 27.1-23365425-637:2008
St1kp (DSTU 2651:2005 / GOST 380-2005) St1ps (DSTU 2651:2005 / GOST 380-2005) St1sp (DSTU 2651:2005 / GOST 380-2005) St2kp (DSTU 2651:2005 / GOST 380-2005) St2ps (DSTU 2651:2005 / GOST 380-2005) St2sp (DSTU 2651:2005 / GOST 380-2005) St3kp (DSTU 2651:2005 / GOST 380-2005) St3ps (DSTU 2651:2005 / GOST 380-2005) St3sp (DSTU 2651:2005 / GOST 380-2005) 08kp (GOST 1050-88) 08ps (GOST 1050-88) 10kp (GOST 1050-88) 10ps (GOST 1050-88) 10 (GOST 1050-88) 15kp (GOST 1050-88) 15ps (GOST 1050-88) 15 (GOST 1050-88) 20kp (GOST 1050-88) 20ps (GOST 1050-88) 20 (GOST 1050-88)	2.0–2.5 × 30 2.0–2.5 × 40–540 2.6–3.0 × 65–540 3.1–4.0 × 70–540	III-IV surface finish group. Shearing spacing is 1ìì. Internal coil diameter is 550 mm plus-and-minus limit 50 mm. Rolled products 4 ìì thick of steel grades St 2 kp (ps,sp) and St3kp (ps,sp) are delivered as per categories 1,2,4,5 GOST 14637-89, delivery as per category 2à TU U 14-16-56-2000 is possible. Rolled products of steel grades St 1 kp (ps,sp) are delivered as per category 2à TU U 14-16-56-2000. For rolled products of steel grade St3sp and 20 delivery of category 4 DSTU 2834-94 (GOST 16523-97) is preferred.
Structural hot-rolled products   GOST 1577-93
08kp (GOST 1050-88) 08ps (GOST 1050-88) 10kp (GOST 1050-88) 10ps (GOST 1050-88) 15kp (GOST 1050-88) 15ps (GOST 1050-88) 20kp (GOST 1050-88) 20ps (GOST 1050-88)	4.0–6.0 × 1000–1500 × 2000–6000 Sheet	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons or up to 16 tons is possible.
Structural hot-rolled products   GOST 1577-93
08kp (GOST 1050-88) 08ps (GOST 1050-88) 10kp (GOST 1050-88) 10ps (GOST 1050-88) 15kp (GOST 1050-88) 15ps (GOST 1050-88) 20kp (GOST 1050-88) 20ps (GOST 1050-88)	6.1–8.0 × 1000–1500 × 2000–4000 Sheet	Mill edge. Rolled-products are delivered with characteristics Á; ÏÍ; M2 and with it mechanical properties are optional. Delivery in coils of weight up to 8 tons or up to 16 tons is possible.
Structural hot-rolled products   GOST 1577-93
10 (GOST 1050-88) 15 (GOST 1050-88) 20 (GOST 1050-88)	4.0–6.0 × 1000–1400 × 2000–6000 Sheet	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons or up to 16 tons is possible.
Structural hot-rolled products   GOST 1577-93
10 (GOST 1050-88) 15 (GOST 1050-88) 20 (GOST 1050-88)	6.1–8.0 × 1000–1400 × 2000–4000 Sheet	Mill edge. Rolled-products are delivered with characteristics Á; ÏÍ; M2 and with it mechanical properties are optional. Delivery in coils of weight up to 8 tons or up to 16 tons is possible.
Structural hot-rolled products (pickled) DSTU 2834-94   GOST 16523-97
08kp (GOST 1050-88) 08ps (GOST 1050-88) 10kp (GOST 1050-88) 10ps (GOST 1050-88) 15kp (GOST 1050-88) 15ps (GOST 1050-88) 20kp (GOST 1050-88) 20ps (GOST 1050-88)	2.0–2.5 × 1000–1250 × 2000–3000 2.6–2.9 × 1000–1360 × 2000–3500 3.0–3.9 × 1000–1500 × 2000–3700 Sheet	Mill edge. III-IV surface finish group.
Structural hot-rolled products (pickled) DSTU 2834-94   GOST 16523-97
10 (GOST 1050-88) 15 (GOST 1050-88) 20 (GOST 1050-88)	2.0–2.4 × 1000 × 2000–3000 2.5–3.5 × 1000–1250 × 2000–3500 3.6–3.9 × 1000–1400 × 2000–3700 Sheet	Mill edge. III-IV surface finish group. For rolled products of steel grade 20, delivery as per category 4 DSTU 2834-94 (GOST 16523-97) is preferred.
Structural hot-rolled products (unpickled) DSTU 2834-94   GOST 16523-97
08kp (GOST 1050-88) 08ps (GOST 1050-88) 10kp (GOST 1050-88) 10ps (GOST 1050-88) 15kp (GOST 1050-88) 15ps (GOST 1050-88) 20kp (GOST 1050-88) 20ps (GOST 1050-88)	2.0–2.5 × 1000–1250 × 2000–4000 2.6–2.9 × 1000–1360 × 2000–4000 3.0–3.9 × 1000–1500 × 2000–6000 Sheet	Mill edge. III-IV surface finish group.
Structural hot-rolled products (unpickled) DSTU 2834-94   GOST 16523-97
10 (GOST 1050-88) 15 (GOST 1050-88) 20 (GOST 1050-88)	2.0–2.4 × 1000 × 2000–4000 2.5–3.5 × 1000–1250 × 2000–4000 3.6–3.9 × 1000–1400 × 2000–6000 Sheet	Mill edge. III-IV surface finish group. For rolled products of steel grade 20 delivery as per category 4 DSTU 2834-94 (GOST 16523-97) is preferred.
Structural hot-rolled products (unpickled)   TU U 14-4-426-98
08kp (GOST 1050-88) 08ps (GOST 1050-88)	2.0–2.5 × 1000–1250 2.6–2.9 × 1000–1360 3.0–3.9 × 1000–1500 Coil	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons. Delivery in coils of weight up to 16 tons of the following product mix is possible: 2,5-2,6õ1000-1250mm; 2,7-2,9õ1000-1280mm; 3,0-3,3õ1000-1330mm; 3,4-3,9õ1000-1360mm.
Structural hot-rolled products (unpickled)   TU U 14-4-426-98
08kp (GOST 1050-88) 08ps (GOST 1050-88) 10kp (GOST 1050-88) 10ps (GOST 1050-88) 15kp (GOST 1050-88) 15ps (GOST 1050-88) 20kp (GOST 1050-88) 20ps (GOST 1050-88)	4.0–6.0 × 1000–1500 Coil	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons or up to 16 tons.
Structural hot-rolled products (unpickled)   TU U 14-4-426-98
08kp (GOST 1050-88) 08ps (GOST 1050-88) 10kp (GOST 1050-88) 10ps (GOST 1050-88) 15kp (GOST 1050-88) 15ps (GOST 1050-88) 20kp (GOST 1050-88) 20ps (GOST 1050-88)	6.1–8.0 × 1000–1500 Coil	Mill edge. Delivery in coils of weight up to 8 tons or up to 16 tons.
Structural hot-rolled products (unpickled)   TU U 14-4-426-98
10 (GOST 1050-88) 15 (GOST 1050-88) 20 (GOST 1050-88)	4.0–6.0 × 1000–1500 Coil	Mill edge. III-IV surface finish group. Delivery in coils of weight up to 8 tons or up to 16 tons.
Structural hot-rolled products (unpickled)   TU U 14-4-426-98
10 (GOST 1050-88) 15 (GOST 1050-88) 20 (GOST 1050-88)	6.1–8.0 × 1000–1500 Coil	Mill edge. Delivery in coils of weight up to 8 tons or up to 16 tons.
Hot-rolled strip (unshaped)   TU U 27.1-00193714-182-2004
St3kp (DSTU 2651:2005 / GOST 380-2005) St3ps (DSTU 2651:2005 / GOST 380-2005) 09Ã2 (GOST 19281-89) 09Ã2Ä (GOST 19281-89) 09Ã2Ñ (GOST 19281-89)	4.0–7.0 × 150–450 × 3000–6000	Delivery of other steel grades and sizes permitted by agreement with the Works.